Stainless Steel Outdoor grade Metal Letters
Stainless Steel Metal letters
275mm - 300mm - 325mm high
2 mm Thick Mill
Layer 1. Laser cut out Stainless steel metal letters. Mill finish 2mm Thick x 300mm high. This stainless steel will last outdoors and will not rust.
Layer 2. Rear, spot welded threaded wall pins. These pins make it very easy to mount the sign into a brick or concrete wall, front sign or internal wooden panel. To install, hold up the letter and drill a 6mm Hole. This will allow suitable movement and leveling of your letters.
The pins are threaded for clients who wish to secure the letters onto a hollow or rear accessible cavity, garden sign or similar.
We also suggest you fill the wall holes with adhesive and apply an adhesive to the rear of the letters when you are ready to place into final position. The letters can be fitted into holes or used as bolts into a frame, wall or building panel.
The material: These letters are laser cut stainless steel mill finish, there is a slight brush effect (grain) which makes for nice visual finish.
We also offer this product in Aluminium. Check them out here!
Other Letter options: Chrome plated - We would laser cut mild steel for chrome plating. This involves first bronze coating then final chrome plating steps. See other products in the 'Laser Cutting' category.
Quantity Discounts: This product has a discount applied at 20 off letters of same height.
Different Letter Heights. Choose from other products in the 'Laser Cutting' category.
Installation: Is very easy, First, using our layout sheet, hold up each letter against the wall and mark the holes for the pins. Drill the holes. When all letters are ready, insert adhesive into the holes and insert the pins. Recheck letters are level, then, all you need to do is remove the face film that protects the shine of the letters. These letters are easily installed by a handyperson.
Tools Needed: Measuring tape, Drill, Suitable adhesive (outdoor - Liquid nails or epoxy resin) Spirit Level.
What can I choose for my sign?
Imagine your logo in this format? This signage can be made to suit lots of logos and themes. Various other techniques can be used at various layers. This design product is changeable and is custom made to your logo/word designs for your company. You can choose your font.
Approximate Shipping: $6 each letter.
Do I order this product?
Yes, This product is priced for size and layer value. If you need the same size height (within 25mm [300mm] +/-) and the same rear pin layer content.
Step 1. Order this sign by completing add to quote and checkout. This will send an email to us with your order. We will then contact you to discuss your letter fonts and assist you with any further delivery questions.
Our signs or graphic department will contact you.
Note: This product requires minimum machinery set up fee included To order, please call and discuss with our expert sign makers.