Layer 1. This sign has no visible fittings or holes showing on any of the top layers, The fitting screws are countersunk into the wall layer so that the entire face is high gloss. Countersunk screws, wall mates and glue is included with this sign. We design every sign to be put easily by a handyperson.
Layer 1. This first layer is white 3mm high gloss acrylic. The centre part of the logo (antenna) is 12mm clear and the layer 1 color shows through the clear to give an amazing signage effect. In this manner, the antenna is glowing from the edge view. Very tricky and very striking.
Layer 2. 12mm Clear (Antenna) laser cut.
Layer 3. 4 mm Black Acrylic surrounding panel. This layer is poly welded and uses extra strong double sided outdoor grade tape to secure to the layer 1 white. Designed for the smallest pieces, the screws are capped by Layer 3.
Layer 4. 10mm High Gloss Black Acrylic 3d laser cut letters. These 3d letters were supplied with a paper plan showing exact positioning for the client. Very easy to follow, installation is easy. The 3d letters are applied to the wall with extra strong double ided outdoor grade tape.
Tools required: Drill, Level, measuring tape. Very easy to install, this signage includes a free layout/installation sheet with measurements.
Notes about this signage: The Kerf values on this signage were set to 'tight'. This means no visible joins are apparent. This signage will be entered into industry awards later this year.