Metal letter for sign and buildings, business signage.
This size shown is a our very common size for buildings signs and the
metal letters are long life outdoor grade, 275mm, 300mm or 325mm High
Stainless Steel Letters x 2mm Thick with 60mm Welded pins- Threaded for easy
sign panel use or extra adhesion into drilled holes.
Moderate path length font or logo. Priced each letter. Great value. Easy to
put up.
These
and similar metal letters can be quoted immediately online at the QSonline
Signs shop -
Category Laser Signage
Layer 1. Laser cut out Stainless steel metal letters. Mill finish 2mm Thick x
300mm high. This stainless steel will last outdoors and will not rust.
Layer 2. Rear, spot welded threaded wall pins. These pins make it very easy to
mount the sign into a brick or concrete wall, front sign or internal wooden
panel. To install, hold up the letter and drill a 6mm Hole. This will allow
suitable movement and levelling of your letters.
The pins are threaded for clients who wish to secure the letters onto a hollow
or rear accessible cavity, garden sign or similar.
We also suggest you fill the wall holes with adhesive and apply an adhesive to
the rear of the letters when you are ready to place into final position.
Other Letter options: Chrome plated - We would laser cut mild steel for
chrome plating. This involves first bronze coating then final chrome plating
steps. See other products in the 'Laser Cutting' category.
Quantity Discounts: This product has a discount applied at 20 off letters of
same height.
Different Letter Heights. Choose from other products in the 'Laser Cutting'
category
1800 815 166
Metal
Letters