This
product is called a '4 Layer Laser cut sign
because the letters are twin mounted (lifted)
using different thickness acrylic cut to size.
It includes the lower section of cut out
letters.
Go
to the products Multi dimension 3d signage Price Details »
If your looking
to make your internal office signage with your logo,
call our design team to discuss ways in which we can
add layers and 3 dimensional effects to your logo.
Product Description and
manufacturing technique -
4 Layer Acrylic Laser cut sign with lower sectional
lettering.
The plan below shows the production planning for
the sign.
-
The cut out letters for this
wall sign are 6mm Black Gloss.
-
Laser cut, the Main logo
section is multi layered combination of 6mm
White, 12 mm Clear, reversed poly welded to
a white 6mm Perspex panel, the top red
antenna image is 'Ice Sign', meaning the red
is reversed coloured. The Black overlay face
is reversed laser cut so that the other
layers are dominant and have depth.
-
Fitting of the sign onto the
wall. The acrylic sections are combined and
Plastic Poly Welded. There are two small
sections that are double sided taped to the
panel. Underneath these two sections,
countersunk screws were used that screw into
wall 'mini mates'. The entire panel was also
glued onto the wall using Liquid Nails. The
screws hold the sign in place and prevent
slipping while the adhesive cures. This is a
very easy sign to install by anyone. It
comes complete ready to go.

The colours have matched to the customers corporate colour scheme.
