These diagrams
show how an acrylic laser cut panel is
lifted away from the wall.
The advantages of placing your signage away
from the wall is that when using clear, the
natural shadows created add to the
aesthetics and feel of surrounds.
Very easy to
put up: Stand off pins are very easy to put
up, all you need is a drill and star bit for
your screws.
Tip: We ensure
that oversized holes are used for your
signs. Hold the panel to the wall and use a
level for positioning. Using a pencil, mark
the spot and drill 'mini mates' into a
plaster wall, screws in the timber wall or
other suitable fitting.
Hold up the
sign and lightly screw the stand off pins
into the lower section. Before you tighten
to the fullest, re check the level of your
sign. If needed, adjust by lifting or
lowering and then tighten the caps.
Putting
a sign away from the wall with stand off pins
