You can also search the gallery for
The special metal letters are still in the
skeleton when polishing occurs.
Delivery Point: Pennant Hills Signs, NSW
Polished Metal Letters. This panel NGS very thick 8mm Stainless Steel
laser cut letters are shown here in the block they were cut from. After
being cut they are fitted with threaded Brass fixing rod. Pennant Hills NSW
Stainless Steel laser cut letters fitted with threaded Brass rod. This
allows them to be affixed to the wall permanently. Pennant Hills NSW
Thick metal letters like this are great for outside signage that can be
inserted onto a brick wall, into a concrete sign board etc. The rear side is
spot welded making the fixing very strong. A secondary technique is to also
use clear plastic mounting behind the metal letter.
Individual metal letter ready for putting up on a brick wall.
New Example: Here is another shot of working the metal letters inside the
panel. The centre of the 'e' will be shipped with the sign. This sign metal
letter will be multi layer plastic and metal as below.
The Stainless Steel panel was mounted to 10mm black Acrylic, which showed
through where the lettering was reverse cut out. This gives a professional
touch and a modern element in the sign. Mascot NSW The Stainless Steel panel
was mounted to 10mm black Acrylic, which showed through where the lettering
was reverse cut out. This gives a professional touch and a modern element in
the sign. Mascot NSW
This smart looking design is stainless steel metal letters over a square
aluminium 4.5mm panel. The metal over metal effect looks great and is very