About Lift Up Stands

#FullView 29. NEW 2007 Video is now available -  Lift Up Stand

Lift Up Stands are those where the base sits on the ground or carpet and you lift from within the base unit the banner sign upwards. The internal motor is the same as a normal window roll blind system without the locking motion. A rear pole is mounted to the top bar and the base is fitted to a special double sided tape within the retractable banner stand unit.

Australia Signs only print onto a smooth vinyl material, not cheap laminated paper or poly substrates. Resolution is set at twin pass 8 head which means approx 150 dpi at offset printing standards, or equals approx 1440 dpi at digital standards. This means great photo resolution and extremely stable ink systems that can withstand sunlight longer than dye based inks.

Advantages of Digital printing onto banner compared with paper. Longer lasting, more stable, less damage, requires no over laminate to protect the inks, can be quickly removed and stored for more use over and over. The banner stand skin is completely replaceable with little effort. The lower fitting base has a special double sided tape that allows you to remove the skin and replace. We also place a double layer over placement tape between the fitting base and the graphic to prevent any 'lip' catching or edge movement.

Quick Size Comparison: The stand is approximately the size of a typical standard DOOR in your office or home. 2000 mm x 825 mm print.

Prices for Banner Stands

More on Print Resolution and Banding. Twin passing the digital heads over the print area means less banding. Banding is the slight overlap seen on cheap prints wherein the ink laydown or technology does not allow ink matching over the previous pass.

This image below is a photo of the retractable banner stand print. The high resolution is achieved because the client could supply a great photo in their file and the printing equipment and in particular RIP system (RIP is the conversion from pixels to ink dots) allowed high quality. The file was adjusted for CMYK print with solvent based ink. High quality TOYO inks are used. Everything is printed in Australia in 4 days! Wow.

The finished Result: This Retractable banner stand will serve the customer well. Nice looking, clear to understand and the visual impact is high.

QSonline has made over 500 Banner Stands

For prices and artwork help etc, continue to the QSonline Pages

The stand is two metres high and 825 mm print width wide. The base measures almost 870mm wide. You can choose from Silver Special (anodised aluminium) or Quick Display (powder coated black). Both models have a silver chrome end cap.

To replace the fittings or graphics, underside the end chrome cap is a small right angle pin that you can insert into the spring wound system. This will stop the banner stand from retracting and allow you remove and replace the current flexible panel with a new design or skin.

Maintenance. Stands will require maintenance and care. The internal workings are slipped into the end panels. If you knock the spring out of position, simply remove the end cap and re-slip the pin into position.

You can watch us producing a similar sign like this one at the MyVideo pages on the left. Check out the Fitting a Banner Stand and Lifting up a Banner Stand, it's very easy.

More special Signs? Click on one these images below.

Also see more details for pre spaced vinyl stick on letters.